Shenzhen Techled Optoelectronics Co., Ltd.
|
Gold Index: 6589
Place of Origin: | Zhejiang, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
High Power 24W Led T8 Tube Light Bulbs 80Ra For Commercial Lighting
Specifications of T8 LED Tubes Compatible EVG / KVG:
Part Number: | TECH-T8-1500-J1024A |
Input Voltage: | AC 100~277V 50/60Hz |
Power Consumption: | 24W |
Light Source: | SMD LEDs |
Luminous Flux: | 3120lm |
Color Temperature: | 3000K (Warm), 4500K (Neutral), 6000K (Cool) |
CRI: | 80 Ra (Typical) |
Construction: | Aluminum; PC Lens |
Physical Dimensions: | Φ26*1500mm |
Base: | G13 |
Remark: | Compatible with ballasts |
Features of T8 LED Tubes Compatible EVG / KVG: | |||||||
1: Compatible with electronic ballast (no re-wiring needed); 2: Can be plugged in directly without removing and rewiring or bypassing the electronic ballasts; 3: Can work in AC 100~277V directly; 4: DLC / TUV certified; |
|||||||
Advantages of T8 LED Tubes Compatible EVG / KVG: | |||||||
1: You just need to plug the T8 LED tubes into an existing fixture with no rewiring no cutting of wires just plug them in and they will work. |
|||||||
Installatons of T8 LED Tubes Compatible EVG / KVG: | |||||||
1: For retrofit project, you don’t need to remove ballast until ballast fails, then you just remove ballast and reinsert tube, it will work without ballast. 2: For new installation project, you can just install the T8 LED tube without any ballast, just direct wiring to the lighting fitting at 100-277 Volts AC. |
Advantages:
1. Self-developed power supply imbedded in the tube is very convenient comparatively with those manufacturers who commonly adopt the method of external positioned of the power supply.
2. The adoption of 2835 LEDs make the tube the best in terms of cost performance.
3. Power supply imbedded in the tube,100% same size as fluorescent tube.
4. Widely used in Government building, School, Shopping mall, Hospital, entertaining venues, family life and outdoor lighting.
5. No buzzing, no flickering, good for eyes.
Quality Control:
1. 100% of the lamps will be tested and kept lighting for 24 hours to test its quality reliability , and we will also test its temperature after 24 hours’ lighting.
2. Then after it is cool we again test 100% of the lamps to see if it still work well . Each lamp should pass all these QC procedures before shipping to customer.
Applications:
1: Hotels, Hospitals, Factories & Offices
2: Commercial Complexes
3: Conference / Meeting rooms
4: Residential / Institution Buildings
5: Schools, Colleges & Universities
.
Aging Test:
Shenzhen Techled Optoelectronics Co., Ltd. [China (Mainland)]
Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)